[c-nsp] Maximizing Router capabilities

[Justin C. Darby]

You should really shop by feature set. Advanced Enterprise IOS  
licenses are expensive. If you don't need all of the features present,  
you should only license the features you need.

Expanding DRAM and Flash beyond what is required for the image you  
need is also sometimes expensive, depending on which router you have.

We can't tell you which IOS does what unless we know which router  
you're using. Features change by platform. Ideally, you can figure out  
which features you need by reading through the IOS documentation at http://cisco.com/go/ios 
  , then use the feature navigator linked below to find an appropriate  
image for your router.

Justin

On Jul 21, 2008, at 10:50 AM, Dracul wrote:

> Thanks all,
> Assuming budget is not a hindrance. So should I go for the advance
> enterprise? Advance enterprise is different from advanced-ip series?
>
> regards,
> Chris
>
> On Mon, Jul 21, 2008 at 11:39 PM, Jon Lewis <jlewis at lewis.org> wrote:
>
>> On Mon, 21 Jul 2008, Dracul wrote:
>>
>> Hi list,
>>> I am trying to maximize my router's capabilty by maximizing its  
>>> DRAM and
>>> Flash. Now I am trying to maximize IOS capabilities. Which is  
>>> better to
>>> load, advance IP IOS or Enterprise IOS?
>>>
>>
>> cisco.com/go/fn
>>
>> Use the image that supports the set of features you need or think  
>> you may
>> need.
>>
>> ----------------------------------------------------------------------
>> Jon Lewis                   |  I route
>> Senior Network Engineer     |  therefore you are
>> Atlantic Net                |
>> _________ http://www.lewis.org/~jlewis/pgp for PGP public  
>> key_________
>>
>
>
>
> -- 
> ===
> Support www.gawadkalinga.org
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/