[c-nsp] 7961G won't boot

[David Prall]

Dan,
I've done this with 7960's, not a 7961.
Have a look at the process for conversion of the phones, here it is for the
7960 couldn't find the same for a 7961:
http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a
0080094584.shtml

http://tinyurl.com/23tw2c

Hope it helps,
David

--
http://dcp.dcptech.com
  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Dan Letkeman
> Sent: Monday, July 21, 2008 2:06 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] 7961G won't boot
> 
> Hello,
> 
> I have a 7961G that won't boot up.  It powers on via poe, shows the
> cisco splash screen with the checkmark in the bottom left corner, then
> shows the upgrading screen for a few seconds, then says error on the
> upgrading screen, then goes back to the cisco splash screen and there
> is a circle with a dot in the middle of it on the bottom left corner.
> 
> Is there anyway to fix this?
> 
> Thanks,
> Dan.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>