[c-nsp] Renaming interfaces on a PIX 525

Jeff Kell jeff-kell at utc.edu
Wed Jul 23 21:29:57 EDT 2008


Justin Shore wrote:
> You might be thinking that you can simply download a copy of the 
> startup-config to a tftp server, modify it and upload it back over top 
> of the startup-config (or running-config).  First off I can't remember 
> where the startup-config is located on the PIX/ASAs or if it can be 
> accessed.  

It can be done on an ASA by copying the new configuration to a different 
filename in flash, and issuing a 'boot config flash:filename' directive 
to the current config.

Not sure if the PIX supports this convention.

Jeff


More information about the cisco-nsp mailing list