[c-nsp] 6509e upgrades to native ios

Leslie Meade lmeade at signal.ca
Thu Jul 24 00:13:04 EDT 2008


I have been reading and following the following document for upgrading
from cat os to native ios

 

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note
09186a008015bfa6.shtml#conv_32

 

I am stuck at reloading the router, I get this error ( I am consoled
into the console port on the sup 32)

 

Router#reload

Reload to the ROM monitor only allowed from console line 
unless the configuration register boot bits are non-zero

 

 

I do a sh bootvar and it shows me

 

Router#sh bootvar 
BOOT variable = c6msfc2a-ipbase_wan-mz.122-18.SXF8.bin,1; 
CONFIG_FILE variable = 
BOOTLDR variable = 
Configuration register is 0x2102 (will be 0x0 at next reload)

 

 

How do I reload the sup32 ? If is reset the config-register back to
0X2102 I am allowed to reload it...

 

Any ideas ??

 

 

 

 



More information about the cisco-nsp mailing list