[c-nsp] 6509e upgrades to native ios

[Leslie Meade]

Oppss....
I re-read the doco again and it did say
switch console
 
 
my bad
 
 
Thanks for the pointer
 
Leslie
 

________________________________

From: Church, Charles [mailto:cchurc05 at harris.com]
Sent: Thu 7/24/2008 6:48 AM
To: Leslie Meade; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] 6509e upgrades to native ios



Did you get into the MSFC via 'switch con' or 'session'.  I'm guessing
session, since that's internal telnet.  Try 'switch con' or 'switch con
SLOT#'

Chuck

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Leslie Meade
Sent: Thursday, July 24, 2008 12:13 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 6509e upgrades to native ios


I have been reading and following the following document for upgrading
from cat os to native ios



http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note
09186a008015bfa6.shtml#conv_32



I am stuck at reloading the router, I get this error ( I am consoled
into the console port on the sup 32)



Router#reload

Reload to the ROM monitor only allowed from console line
unless the configuration register boot bits are non-zero





I do a sh bootvar and it shows me



Router#sh bootvar
BOOT variable = c6msfc2a-ipbase_wan-mz.122-18.SXF8.bin,1;
CONFIG_FILE variable =
BOOTLDR variable =
Configuration register is 0x2102 (will be 0x0 at next reload)





How do I reload the sup32 ? If is reset the config-register back to
0X2102 I am allowed to reload it...



Any ideas ??









_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/