[c-nsp] DFC module insert message?

[Reinhold Fischer]

On Fri, Jul 25, 2008 at 02:44:02PM -0400, Jeff Fitzwater wrote:
> I have 6500 with sup-720 with PFC3CXL and I just inserted new DFCXL  
> 8port 10G module which  logged some strange messages but still came up  
> and appears OK.
> 
> Any ideas on these before I get  in touch with cisco tech ?
> 
> These messages appeared just before initial module diags finished and  
> module came online....
> 
> 17:22:40.583 FW[Mod 12]: AR#0 WARNING: Cannot HALT Dic#0
> 17:22:40.591 FW[Mod 12]: ME_AR#0 WARNING: Cannot FLUSH Dic#0
> 17:22:40.631 FW[Mod 12]: AR#1 WARNING: Cannot HALT Dic#0
> 17:22:40.643 FW[Mod 12]: ME_AR#1 WARNING: Cannot FLUSH Dic#0
> 17:22:40.683 FW[Mod 12]: AR#0 WARNING: Cannot HALT Dic#1
> 17:22:40.691 FW[Mod 12]: ME_AR#0 WARNING: Cannot FLUSH Dic#1
> 17:22:40.735 FW[Mod 12]: AR#1 WARNING: Cannot HALT Dic#1
> 17:22:40.743 FW[Mod 12]: ME_AR#1 WARNING: Cannot FLUSH Dic#1
> 
> 
Jeff,

i have seen them also (WS-X6708-10G-3C, Sup720-PFC3B, IOS SXH2a) and
asked Cisco Anvanced Services about it. The answer was that it
is nothing to worry about. It should be seen as a cosmetical issue,
and there is an internal bug-id to remove the message during module
initialization in future software releases.

reinhold