[c-nsp] Rate-limiting VLAN passing through a switch

[Arie Vayner (avayner)]

Steeve,

For 3550:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/relea
se/12.2_44_se/configuration/guide/swqos.html#wp1145280

For 3560:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/relea
se/12.2_44_se/configuration/guide/swqos.html#wp1703760

Arie 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Skeeve Stevens
Sent: Saturday, July 26, 2008 09:02 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Rate-limiting VLAN passing through a switch


Ok guys,

I am been trying to rate-limit a layer 2 vlan which passes through a
switch.

I understand that it is done differently on a 3550 and a 3560, but I
need some examples as I am stumped in trying to make it happen, and all
efforts have seemed to have failed so far.

Thoughts?  Any example of rate-limiting a vlan to like 3MB or something
as an example would be good.

--
Skeeve Stevens, RHCE
skeeve at skeeve.org / www.skeeve.org
Cell +61 (0)414 753 383 / skype://skeeve

eintellego - skeeve at eintellego.net - www.eintellego.net
--
I'm a groove licked love child king of the verse Si vis pacem, para
bellum


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/