[c-nsp] 6509 ACE/FWSM Modules??????????

[Mike Louis]

Last time I checked the 3750 did not support the pagp extensions for vss. You would get an stp loop if you tried. Has this support changed?

-----Original Message-----
From: Teller, Robert <RTeller at deltadentalwa.com>
Sent: Tuesday, July 29, 2008 7:42 PM
To: Tony Varriale <tvarriale at comcast.net>; cisco-nsp at puck.nether.net <cisco-nsp at puck.nether.net>
Subject: Re: [c-nsp] 6509 ACE/FWSM Modules??????????


My plan is to collapse my core switch(3750), pix, and css devices into
two 6509's with the fwsm/ace/Gig-e modules. I am just trying to decide
the best way to segregate the internal lan and middle tier dmz's.

-----Original Message-----
From: Tony Varriale [mailto:tvarriale at comcast.net]
Sent: Tuesday, July 29, 2008 4:27 PM
To: Teller, Robert; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 6509 ACE/FWSM Modules??????????

If you want something somewhat Cisco centric, the Networkers slides on
the
ACE blades are ok.  They cover some nice basics about load balancing and

about the ACE blades.

For FWSM, the Cisco docs are decent.  The code is almost the same as on
the
pix/asa.  So the Cisco Press firewall book would do well.

tv
----- Original Message -----
From: "Teller, Robert" <RTeller at deltadentalwa.com>
To: "Tony Varriale" <tvarriale at comcast.net>; <cisco-nsp at puck.nether.net>
Sent: Tuesday, July 29, 2008 6:19 PM
Subject: RE: [c-nsp] 6509 ACE/FWSM Modules??????????


Yeah I am going to have a contractor come in for a day to work on some
of the best practices type stuff but was looking for a book to read on
the side.

-----Original Message-----
From: Tony Varriale [mailto:tvarriale at comcast.net]
Sent: Tuesday, July 29, 2008 4:11 PM
To: Teller, Robert; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 6509 ACE/FWSM Modules??????????

Sorry, VSS and those modules are not supported yet.

The ACE and FWSM blades are somewhat complex.  I would recommend
piggy-backing on someone that has experience.

tv
----- Original Message -----
From: "Teller, Robert" <RTeller at deltadentalwa.com>
To: <cisco-nsp at puck.nether.net>
Sent: Tuesday, July 29, 2008 5:49 PM
Subject: [c-nsp] 6509 ACE/FWSM Modules??????????


>I am working on implementing two 6509 chassis setup using vss and
> ace/fwsm modules. Anyone know of any good books for the ACE and FWSM
> modules?
>
>
>
> #########################################################
> The information contained in this e-mail and subsequent attachments
may be
> privileged,
> confidential and protected from disclosure.  This transmission is
intended
> for the sole
> use of the individual and entity to whom it is addressed.  If you are
not
> the intended
> recipient, any dissemination, distribution or copying is strictly
> prohibited.  If you
> think that you have received this message in error, please e-mail the
> sender at the above
> e-mail address.
> #########################################################
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/





_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure.  If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited.  If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately.