[c-nsp] QoS VLAN trunk Port

[Arie Vayner (avayner)]

Some pointers:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/na
tive/configuration/guide/qos.html#wp1726124 
http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_m2.html#wp
1016198

In general, you enable "mls qos vlan-based" on the trunk, and apply the
qos policy on the SVI (interface vlan) - even without any L3 config on
the SVI.

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Cheikh-Moussa
Ahmad
Sent: Friday, June 06, 2008 17:44 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] QoS VLAN trunk Port

Hi!

I have a general question to QoS VLAN based. I have read a lot of
documentation, but did not found the right answer.
Is it possible to police traffic on an trunk port per vlan ?

For Example, I want to limit vlan 100 to 5Mbps and the vlan 200 to
2Mbps, vlan 300 is unlimited.

4500 <--Trunk vlan 100,200,300 --> 4500

Is this possible ?
If yes, what is the name of the feature and how to configure ?


Regards,
 Ahmad