[c-nsp] T1 configuration

Paul Stewart paul at paulstewart.org
Mon Jun 9 12:15:19 EDT 2008


Hi there..

We have a 6509 (sup2) installed and about to bring up some T1 interfaces on
it.. confused over the configuration and only have a limited window of time
to try and implement off hours tonight ;)

WS-X6182-2PA port adapters with PA-MC-8T1 cards are installed in this box...

Currently, the configuration shows:

controller T1 6/0/0
 framing esf
 linecode b8zs
!
controller T1 6/0/1
 framing esf
 linecode b8zs
!
controller T1 6/0/2
 framing esf
 linecode b8zs
!
controller T1 6/0/3
 framing esf
 linecode b8zs
!
controller T1 6/0/4
 framing esf
 linecode b8zs
!
controller T1 6/0/5
 framing esf
 linecode b8zs
!
controller T1 6/0/6
 framing esf
 linecode b8zs
!
controller T1 6/0/7
 framing esf
 linecode b8zs

I expected to see serial interfaces further down in the configuration but
nothing is showing... I checked Cisco.com and it keeps referencing
configuration on the Serial interfaces (which is the way we have it on
5350/5400 boxes for channelized).  Is this because I need to configure
timeslots still on the controller?

Thanks,


Paul




More information about the cisco-nsp mailing list