[c-nsp] ip multicast rate-limit

[Arie Vayner (avayner)]

I suggest you try using a regular policy map, building a class with the
traffic matched in an ACL, and apply a regular police policy on that
class...
Arie 

-----Original Message-----
From: Hank Nussbacher [mailto:hank at efes.iucc.ac.il] 
Sent: Saturday, June 14, 2008 21:50 PM
To: Arie Vayner (avayner)
Cc: cisco-nsp at puck.nether.net; Zenon Mousmoulas
Subject: RE: [c-nsp] ip multicast rate-limit

On Sat, 14 Jun 2008, Arie Vayner (avayner) wrote:

> Hank,
>
> What are you trying to achieve?
> Can you please share "show module"?

Trying to limit SAP storms.

11    0  4-subslot SPA Interface Processor-400  7600-SIP-400 
JAE12035DJ5
11/0 1xOC48 POS/RPR SPA          SPA-1XOC48POS/RPR  JAE11441NKV  2.3
Ok

-Hank

>
> Thanks
> Arie
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Hank 
> Nussbacher
> Sent: Thursday, June 12, 2008 16:02 PM
> To: cisco-nsp at puck.nether.net
> Cc: Zenon Mousmoulas
> Subject: [c-nsp] ip multicast rate-limit
>
> http://www.cisco.com/en/US/docs/ios/ipmulti/command/reference/imc_03.h
> tm
> l#wp1016097
> In 12.2(18)SXF11:
>
> petach-tikva-gp(config)#int pos11/0/0
> petach-tikva-gp(config-if)#ip multicast rate-limit in group-list 
> SAP-mcast-group 1000  "ip multicast rate-limit" command is not 
> supported
>
> So I go to:
> http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/
> na
> tive/release/notes/OL_4164.html
> where it says:
> "The ip multicast rate-limit command is not supported on LAN ports.
> (CSCds22281)"
>
> So what 12.2SX version supports ip multicast rate-limit on a POS 
> interface?
>
> Thanks,
> Hank
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>