[c-nsp] PBR noob question

[Adam Greene]

Hi,

I'm setting up basic PBR on a remote router (3640, IOS 12.3(26)) and am having some problems testing whether it's working. 

====
access-list 20 permit 10.10.60.1 0.0.1.255
!
route-map Special_Subnet
 match ip address 20
 set ip default next-hop 10.10.34.2
!
int f1/0 
 ip address 192.168.2.1 255.255.255.252
!
int f2/0
 ip address 10.10.34.1 255.255.255.252
!
int f3/0
 ip address 172.20.20.1 255.255.255.0
 ip address 10.10.60.1 255.255.254.0 secondary
 ip policy route-map Special_Subnet
!
ip route 0.0.0.0 0.0.0.0 192.168.2.2
====

I guess the main question is, when I ping from the router CLI, to an IP address not in the routing table, with a source address of 10.10.60.1, will the ping packets be sent to 10.10.34.2? Or will only the packets sent by hosts in the 10.10.60.0/23 range, connected to int f3/0, be sent to 10.10.34.2?

Unfortunately, the IOS doesn't support the /source option on traceroute commands, so I can't test in that way, and at the moment, I have nothing connected to int f3/0 in the 10.10.60.1/23 range ....

Thanks for your help,
Adam