[c-nsp] Routing between VRF and non-VRF

[Christopher Hunt]

You may want to look into route leaking:  
http://www.cisco.com/en/US/tech/tk436/tk832/technologies_configuration_example09186a0080231a3e.shtml

Christopher Hunt




Garry wrote:
> Maybe I'm missing something here, but what's the "right" way of 
> routing between VRF and non-VRF interfaces?
>
> I know that something like this works:
>
> ip route vrf MYVRF 0.0.0.0 0.0.0.0 gig1/0 192.168.123.1
>
> Anyway, this requires the data being routed out of the router and 
> towards another one ... I've tried different things to keep the actual 
> transition between VRF and non-VRF on the same router, but have 
> failed, either by the router denying what I tried to put in, or it not 
> working ... docs didn't seem to contain any other info, either, or I 
> didn't find the correct document ...
>
> so, what am I missing here?
>
> Tnx, -garry
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/