[c-nsp] 802.1q vlans and L2TPv3 tunnels

[Steven Pfister]

Sorry to keep sending emails on this, but this project I'm working on has been going on for a couple of months and I'd like to finish it at some point. 

I'm trying to gain access to vlans at a remote ATM-connected site and assign them to ports on a switch at a central location. I need to do this for about 10 remote sites, one at a time. I was told that L2TPv3 was a good thing to use for this. Now, with much help, I've got an L2TPv3 tunnel set up between the 3640 at the remote site and a 3640 plus 3550 switch at the central site. The tunnel is established, but nothing seems to go through it. 

Has anyone used 802.1q vlans with L2TPv3 tunnels like this? I'm sure it has to be something simple that I've forgotten about...

Thanks!

--Steve

Steve Pfister
Technical Coordinator, 
The Office of Information Technology
Dayton Public Schools
115 S. Ludlow St. 
Dayton, OH 45402
 
Office (937) 542-3149
Cell (937) 673-6779
Direct Connect: 137*131747*8
Email spfister at dps.k12.oh.us