[c-nsp] GRE/MPLS

[Rodney Dunn]

It's because the MPLS and GRE are done by the sup and it needs
two passes to do the VRF lookup pre and post encapsulation from
what I remember.

Rodney

On Wed, Jun 25, 2008 at 08:14:33AM +0100, Timothy Arnold wrote:
> 
> >Does the addition of the global command 'mls mpls tunnel-recir' make any
> >difference? I've seen some weirdness before with GRE tunnels and MPLS
> >without this command.
> 
> And my problems magically go away. As soon as I enabled the command, I was able to see the rest of the VRF
> 
> Thanks Matthew!
> 
> 
> 
> 
> Timothy Arnold
> Senior Engineer, Network & Security Group, UKSolutions
> 
> Telephone: 0845 004 1333, option 2
> Email: timothy.arnold at uksolutions.co.uk
> Web: http://www.uksolutions.co.uk/
> UKS Ltd, Birmingham Road, Studley, Warwickshire, B80 7BG Registered in England Number 3036806
> This email must be read in conjunction with the legal & service notices on http://www.uksolutions.co.uk/disclaimer
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/