[c-nsp] CISCO-ENVMON-MIB initial Index change in in SXH2a?

[David Freedman]

My SHX2a boxes are showing a shift from small to large initial index
numbers (ciscoEnvMonTemperatureStatusIndex) in CISCO-ENVMON-MIB in the
ciscoEnvMonTemperatureStatusTable, release notes mention nothing about
this, bugtool turns up a blank, has anybody else seen this? is it
intentional?

SXF box and below:

SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.1 = STRING: "VTT 1 outlet
temperature"
SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.2 = STRING: "VTT 2 outlet
temperature"
SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.3 = STRING: "VTT 3 outlet
temperature"


SHX2a box:

SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.40010 = STRING: "VTT 1 outlet
temperature"
SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.40020 = STRING: "VTT 2 outlet
temperature"
SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.40030 = STRING: "VTT 3 outlet
temperature"


Whilst it is entirely correct that one should first walk the
ciscoEnvMonTemperatureStatusTable in order to retrieve the index ,
I've always been able to use the static OID
.1.3.6.1.4.1.9.9.13.1.3.1.3.1 to get VTT 1 outlet temperature.

Any thoughts appreciated.

Dave.