[c-nsp] Can not enter privileged mode

[Ziv Leyes]

Can you try getting into "enable 10" level and from there to try "enable" ? If not, I guess you'll have to get physical access to the box and fix it through console.

Ziv


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Lu Wen-yan
Sent: Friday, June 27, 2008 7:59 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Can not enter privileged mode

Hello guys,

  I'm trying to restrict user's privilege on my routers . I configured "privilege exec level 10 enable" on my router without thinking.
    Then I can not enter privilege mode anymore :(  Because ">" mode is less than level 10. I can not type "enable" in that mode.

   I can not reboot my router remotely. I tried to use some snmp-tools (Like WinAgents IOS Config editor) to update my running-config. But it seems this command is still there...

Any one can help me?  Thanks

--
Best regards,
 Lu                          mailto:oioi at cableplus.com.cn

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/





************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************






 
 
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************