[c-nsp] RSVP and split-horizon
Oliver Boehmer (oboehmer)
oboehmer at cisco.com
Mon Jun 30 08:29:53 EDT 2008
Sam Stickland <mailto:sam_mailinglists at spacething.org> wrote on Monday,
June 30, 2008 2:21 PM:
> Oliver Boehmer (oboehmer) wrote:
>> Sam Stickland <> wrote on Monday, June 30, 2008 12:48 PM:
>>
>>
>>> Hi,
>>>
>>> Is there some way to disable/work-around RSVPs split horizon checks?
>>> Currently it will log messages like this when receiving path
>>> requests on the same interface it needs to forward out of:
>>>
>>> RSVP: can't forward Path out received interface
>>>
>>> This could be fixed in the topology, but I'm trying to understand
>>> my options.
>>>
>>
>> hmm, not sure if there are any options according to RSVP specs
>> RFC2205, Section 2.3:
>>
>> "State that is received through a particular interface I* should
>> never be forwarded out the same interface. Conversely, state that
>> is forwarded out interface I* must be computed using only state
>> that arrived on interfaces different from I*."
>>
>> what are you trying to achieve?
>>
> I was trying to get a working RSVP reservation between two spokes on a
> frame-relay setup. Spokes are point-to-point links and the hub is
> point-to-multipoint.
>
> Is this setup possible?
I don't know for certain, but don't think it is..
oli
More information about the cisco-nsp
mailing list