[c-nsp] MTU over L2TPv3 tunnel

[Nathan]

On Thu, Feb 28, 2008 at 1:38 PM,  <alex at alsn.be> wrote:
>  When i increase the mtu on the NPE-G1 side packets are dropped. Even with
>  PMTU or DFbit not set.

Well, you have to increase on the Catalyst side too. The whole Layer 2
should be the same MTU everywhere, and your switches are probably 1500
by default. Going by the Catalysts I've handled you want to examine
either the "mtu" on each interface or else the "system mtu".

-- 
Nathan