[c-nsp] eigrp and ospf on same switch

[Mark Holloway]

And if you change EIGRP K values, don't break the network! ;)


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ben Steele
Sent: Monday, March 03, 2008 2:54 PM
To: Higham, Josh
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] eigrp and ospf on same switch


On 04/03/2008, at 2:25 AM, Higham, Josh wrote:
>
> A small note, the default for EIGRP is to only consider bandwidth and
> delay, so the other values will have no impact.

Another small note :) is that despite the fact EIGRP doesn't use all  
the metrics to calculate its path you do need to fill all 5 out if you  
choose to set a metric when redistributing. hence why I told him to  
use 255 1 and 1500 as while he doesn't really need to "care" about  
these values, he still needs to enter them.

Ben
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/