[c-nsp] show ip bgp community (not X) ?

[Peter Rathlev]

Hi Neil,

Thanks, but that was exactly what I was trying to avoid: Having to
configure ("conf t") the box every time I need to view something a
little more exotic than just "prefixes with this community". But I guess
there's no way around at the moment. :-)

Regards,
Peter

On Thu, 2008-03-13 at 08:54 +1300, Neil Fenemor wrote:
> Perhaps look at creating a community-list with a deny for the  
> community you want to exclude, and a permit any. That's about all I  
> can think of eh...
> 
> Sorry I couldn't come up with something more fitting to your needs.
> 
> On 12/03/2008, at 11:42 PM, Peter Rathlev wrote:
> 
> > Hello all,
> >
> > When "browsing" BGP RIB, it's nice to be able to do a "show ip bgp
> > community X" in global exec. But sometimes I of course want to show
> > something more complex, like everything _without_ a specific  
> > community.
> > The only way I know about is creating a community-list and using that
> > for filtering, but that forces me to configure the box.
> >
> > Is there any "shorthand" from global exec to do something like that?  
> > We
> > have scripts backing config up on every "Configured by", so having to
> > configure the box just to do a show seems a little cumbersome. Or is
> > there a much smarter way to do things? :-)
> >
> > Thanks,
> > Peter
> >
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> Neil Fenemor
> FX Networks
>