[c-nsp] WS-X6148-RJ-21 performance check

[Peter Rathlev]

Hi Diogo,

On Thu, 2008-03-13 at 10:59 -0300, Diogo Montagner wrote:
> how I can check if a C6513/WS-X6148-RJ-21 module reached the maximum forward
> capacity (in this case 15 Mpps) ?

You can check the forwarding engine load with "show platform hardware
capacity forwarding", it shows up at the bottom. The 15 mpps are for the
whole system, not per card.

The "show mls statistics" gives you some information too, including the
current forwarding rate. If you're using a fabric enabled supervisor,
the "show platform hardware capacity fabric" can also give you some
information, though not about bus-cards like the 6100-series.

Regards,
Peter