[c-nsp] 12008 GRPB memory problem.

[Michael Smith]

On Mar 14, 2008, at 10:40 AM, Troy Beisigl wrote:

> Hmmm. Well I installed the RAM and it still thinks I have 256M  
> instead of
> 512M. Checked and upgraded the ROMMON to version 2.2 and am running
> 12.0(32)S8. Are there different versions of the GRP-B RPs? I know  
> for sure
> that the RAM I have is 512M yet the RP still sees it as 256M. Anyone  
> have
> any ideas or should I try and get another GRP-B to replace this one?

>
>  FRU:  Linecard/Module: GRP-B=
>  Route Memory: MEM-GRP/LC-256=
>  MBUS Agent Software version 2.55 (RAM) (ROM version is 2.41)
>  ROM Monitor version 2.2
>  Primary clock is CSC 1
>  Flags: 0x0
>  Board State is IOS Running  ACTIVE (ACTV  RP )
> Insertion time: 00:00:04 (16:48:06 ago)
>   DRAM size: 268435456 bytes
>

Hello Troy:

Here's one from mine.  You may want to check the other variables  
listed below to see how they match up to yours.  I think my card is  
pretty old, though, and it recognizes the 512 RAM.

   FRU:  Linecard/Module: GRP-B=
         Route Memory: MEM-GRP-512=
   MBUS Agent Software version 2.55 (RAM) (ROM version is 3.46)
   ROM Monitor version 2.2
   Primary clock is CSC 1
   Flags: 0x0
   Board State is IOS Running  ACTIVE (ACTV  RP )
   Insertion time: 00:00:04 (17w3d ago)
   DRAM size: 536870912 bytes

  MAIN: type 19,  800-2427-03 rev A0
         Deviation:  D029906
         HW config: 0x00    SW key: FF-FF-FF
   PCA:  73-2170-08 rev A0 ver 5
         Design Release 1.5  S/N CAB0608MNQF
   MBUS: MBUS Agent (1)  73-2146-07 rev B0 dev 0
         HW version 1.2  S/N CAT005102HT
         Test hist: 0xFF    RMA#: FF-FF-FF    RMA hist: 0xFF

Regards,

Mike