[c-nsp] DOM for 6724, could it be??

[Tassos Chatzithomaoglou]

Saku Ytti wrote on 30/3/2008 5:44 μμ:
> On (2008-03-30 10:29 -0400), Chris Griffin wrote:
> 
>> Running 12.2.33SXH1 with SFP-GE-S style SFPs.  Module 1 is a 6724.
> 
> Weird, I got our SE find out this, and answer was the LAN blades
> don't have hardware to read he higher addresses where this data is.
> 

According to 
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_8031.html 
they're right.

Next SXH version will probably "fix" it, as this seems one of the "it was never intended to be 
implemented" cases ;)


Chris, can you try the "show interface transceiver supported-list" command please?


--
Tassos

> If this really is true, and I got misinformation back from cisco,
> now only what I need is LAN card  refresh that'll do 10/100/1000
> on copper SFP's.
> 
>> show int transceiver
>> Transceiver monitoring is disabled for all interfaces.
>>
>> If device is externally calibrated, only calibrated values are printed.
>> ++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.
>> NA or N/A: not applicable, Tx: transmit, Rx: receive.
>> mA: milliamperes, dBm: decibels (milliwatts).
>>
>>                                           Optical   Optical
>>           Temperature  Voltage  Current   Tx Power  Rx Power
>> Port     (Celsius)    (Volts)  (mA)      (dBm)     (dBm)
>> -------  -----------  -------  --------  --------  --------
>> Gi1/9      39.8       3.27       4.8      -6.2      -6.1
>> Gi1/10     40.7       3.26       4.5      -5.6      -6.1
>> Gi1/11     40.0       3.27       4.4      -5.1      -6.5
>> Gi1/12     39.8       3.27       4.7      -5.8      -6.7
>> Gi1/13     40.0       3.27       4.3      -5.5      -5.5
>> Gi1/15     40.7       3.28       4.5      -5.5      -6.0
>> Gi1/16     40.7       3.28       4.6      -5.8      -5.1
>> Gi1/17     40.8       3.27       4.3      -5.5      -5.1
>>
>> Also noticed in inventory:
>>
>> NAME: "Gi1/15", DESCR: "1000BaseSX"
>> PID:                   , VID:    , SN:
>>
>> NAME: "Gi1/15 Module Temperature Sensor", DESCR: "GigabitEthernet1/15 
>> Module Temperature Sensor"
>> PID:                   , VID:    , SN:
>>
>> NAME: "Gi1/15 Supply Voltage Sensor", DESCR: "GigabitEthernet1/15 Supply 
>> Voltage Sensor"
>> PID:                   , VID:    , SN:
>>
>> NAME: "Gi1/15 Bias Current Sensor", DESCR: "GigabitEthernet1/15 Bias 
>> Current Sensor"
>> PID:                   , VID:    , SN:
>>
>> NAME: "Gi1/15 Transmit Power Sensor", DESCR: "GigabitEthernet1/15 
>> Transmit Power Sensor"
>> PID:                   , VID:    , SN:
>>
>> NAME: "Gi1/15 Receive Power Sensor", DESCR: "GigabitEthernet1/15 Receive 
>> Power Sensor"
>> PID:                   , VID:    , SN:
>>
>> The release notes mention Digital Optical Monitoring (DOM) Phase 2 as a 
>> new feature.  Is DOM now officially supported on the 6724??
>>
>> -- 
>> Chris Griffin                           cgriffin at ufl.edu
>> Sr. Network Engineer - CCNP             Phone: (352) 273-1051
>> CNS - Network Services                  Fax:   (352) 392-9440
>> University of Florida/FLR               Gainesville, FL 32611
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>