[c-nsp] concentrator issues since PUBLIC interface move

[Masood Ahmad Shah]

Whenever you change a subnet (network); you need to check to check/update
the following..

Update your routing table accordingly.
Update concentrator or between router access lists.

Regards,
Masood Ahmad Shah


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Scott Ingram
Sent: Monday, March 31, 2008 3:50 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] concentrator issues since PUBLIC interface move

since I moved the public interface to another subnet I'm having issues with
all my site to site vpn's that were active prior to the move. I went to all
the remote sites and changed my address and reset each site. Now I have all
sites connected however, TX data only. I'm running code 4.x on the
concentrator and all other remote client access is ok just the site to site
VPNs.

 


IMPORTANT NOTICE:

This message is intended only for the use of the individual or entity to
which it is addressed and may contain information that is privileged,
confidential and exempt from disclosure under applicable law.  If you have
received this message in error, you are hereby notified that we do not
consent to any reading, dissemination, distribution or copying of this
message.  If you have received this communication in error, please notify
the sender immediately and destroy the transmitted information.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/