[c-nsp] snmp access list
Rafael Rodriguez
Rafael.Rodriguez at msmc.com
Fri May 2 17:42:38 EDT 2008
Permit/deny queries to SNMP daemon via the ACL. If your ACL only
permits 1.1.1.1, and 2.2.2.2 tries to get/set from SNMP, ACL drops it.
Cheers,
RR
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jeff Fitzwater
Sent: Friday, May 02, 2008 17:06
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] snmp access list
Does anybody know how a numbered standard ACL that is applied to snmp
traffic via commands shown below, actually works?
Does the SNMP process still get touched when a DENY is hit?
snmp-server community xxxx RO 99
snmp-server community xxxx RW 99
Thanks for any info.
Jeff Fitzwater
OIT Network Systems
Princeton University
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list