[c-nsp] trunks, vlans and a metroLAN

Raphael Bouaziz bouaziz at nerim.net
Sat May 3 08:43:33 EDT 2008


Hi,

On Fri, May 02, 2008, Gert Doering wrote:
> In IPv6, the ::0 host address is perfectly valid.

Used to believe that too, but today I'm not so sure.

RC3-1(config)#int g1/17
RC3-1(config-if)#ipv6 add 2001:7a8:1:1500::/64
% 2001:7A8:1:1500::/64 should not be configured on GigabitEthernet1/17, a subnet router anycast

RC3-1(config-if)#ipv6 add 2001:7a8:1:1500::1/64
RC3-1(config-if)#

Also:

RC3-1(config-if)#ipv6 add 2001:7a8:1:1500:ffff:ffff:ffff:ffff/64
% 2001:7A8:1:1500:FFFF:FFFF:FFFF:FFFF/64 should not be configured on GigabitEthernet1/17, a reserved anycast

(7600 w/ 12.2(18)SXF10).

-- 
Raphael Bouaziz.


More information about the cisco-nsp mailing list