[c-nsp] My Cisco 3825 doesn't support HWIC 2CE1T1-PRI ?
Dean Smith
dean at eatworms.org.uk
Tue May 6 04:00:28 EDT 2008
CCO Clearly shows the minimum IOS required.
http://www.cisco.com/en/US/prod/collateral/modules/ps2797/product_data_sheet0900aecd80710c88.html
Table 2. Minimum Cisco IOS Software Requirements
Minimum Cisco IOS Software Feature Set
Minimum Cisco IOS Software Release
IP BASE
. 12.4(11)XW4
. 12.5T first release (TBD)
----- Original Message -----
From: "Tojonirina RAONISOAFIANINANA" <tojo.raonisoa at gmail.com>
To: <cisco-nsp at puck.nether.net>
Cc: <aarivo at dts.mg>
Sent: Tuesday, May 06, 2008 8:52 AM
Subject: [c-nsp] My Cisco 3825 doesn't support HWIC 2CE1T1-PRI ?
> Hi all !
>
> I want to configure a HWIC 2CE1T1-PRI with a Cisco 3825 (IOS
> "c3825-adventerprisek9-mz.124-12.bin"), but when I try to configure it, I
> always get an error message.
>
> Here is the config and the error message:
>
> Router#conf t
> Enter configuration commands, one per line. End with
> CNTL/Z.
> Router(config)#network-clock-participate wic 0
> WIC slot is empty or does not support clock participate
> Router(config)#
> Router(config)#
>
> Please, could someone give me a solution for this problem ?
>
> Best Regards
>
> Tojo
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list