[c-nsp] max mac-addresses on a 3CXL/3BXL chassis

Tassos Chatzithomaoglou achatz at forthnet.gr
Tue May 6 07:49:44 EDT 2008


Although the operating mode of a 7606/RSP720-3CXL (12.2(33)SRB2) is PFC3BXL (due to a 3BXL card), i can see 96k as the maximum 
number of mac-addresses on the SUP, which means i'm not loosing one of the advantages of 3CXL mode. Am i missing something here?


7606#sh mod
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
   1   48  48-port 100FX SFP Ethernet Module      WS-X6148-FE-SFP    xxx
   4   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       xxx
   6    2  Route Switch Processor 720 (Active)    RSP720-3CXL-GE     xxx

Mod  Sub-Module                  Model              Serial       Hw     Status
---- --------------------------- ------------------ ----------- ------- -------
   4  Distributed Forwarding Card WS-F6700-DFC3BXL   xxxxxxxxxxx  5.3    Ok
   6  Policy Feature Card 3       7600-PFC3CXL       xxxxxxxxxxx  1.0    Ok
   6  C7600 MSFC4 Daughterboard   7600-MSFC4         xxxxxxxxxxx  1.1    Ok


7606#sh platform hardware pfc mode
PFC operating mode : PFC3BXL


7606#sh platform hardware capacity forwarding
L2 Forwarding Resources
            MAC Table usage:   Module  Collisions  Total       Used       %Used
                               4                0  65536        139          1%
                               6                0  98304         82          1%


--
Tassos


More information about the cisco-nsp mailing list