[c-nsp] Route Optimization/Control Options?

[David Prall]

Since the 6500/7600 doesn't support TCP Flags, it can't do passive
monitoring. So active monitoring must be done, IP SLA probes.

David

--
http://dcp.dcptech.com
  

> -----Original Message-----
> From: Steve Feldman [mailto:feldman at twincreeks.net] 
> Sent: Tuesday, May 13, 2008 5:16 PM
> To: David Prall; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Route Optimization/Control Options?
> 
> 
> On May 13, 2008, at 1:16 PM, David Prall wrote:
> > Have you looked at PfR
> >
> > http://www.cisco.com/go/pfr
> >
> > There is no cost except the configuration. So it would be 
> somewhere  
> > good to
> > start.
> >
> 
> Has anyone out there successfully deployed PfR using 6500-series
> equipment?
> 
> We're considering it, but haven't started lab testing yet.
> 
> And a related question: Ignoring PfR, is 12.2(33)SXH stable enough
> for production use?  (Nothing fancy, full BGP from ~5 neighbors.)
> 
> Thanks,
> 	Steve