[c-nsp] IPv6 load testing

Kevin Barrass K.J.Barrass at leeds.ac.uk
Wed May 14 04:44:53 EDT 2008


 

Cheers will try iperf out, just building 2 Linux PCs now as I type :0)

Regards

Kev

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Eric Van Tol
Sent: 13 May 2008 17:33
To: Kevin Barrass; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] IPv6 load testing

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp- 
> bounces at puck.nether.net] On Behalf Of Kevin Barrass
> Sent: Tuesday, May 13, 2008 10:07 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] IPv6 load testing
>
>
> Hi
>
> We are looking to push IPv6 support on our network onto some Cisco 
> 4500's but as the supervisor we currently have doesn't support IPv6 in

> hardware I want to load one of our test 4500s up with realistic IPv6 
> Unicast traffic to see what impact it has on the switch.
>
> Does anyone know of any free software I can get to do this.
>
> Regards
>
> Kev

iperf should do the job:

http://dast.nlanr.net/Projects/Iperf/

-evt
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list