[c-nsp] Set a L3 routed interface on a 6500 + SUP2 to 'promiscuous'mode?

[David Coulson]

What mac is it sending too? where does it get the arp entry from?

-- 
David Coulson <david at davidcoulson.net>
Sent from my BlackBerry

-----Original Message-----
From: "Rafael Rodriguez" <Rafael.Rodriguez at msmc.com>

Date: Thu, 15 May 2008 19:34:25 
To:<cisco-nsp at puck.nether.net>
Subject: [c-nsp] Set a L3 routed interface on a 6500 + SUP2 to 'promiscuous'
	mode?


Hello all,

Here is the issue I am facing:

We have a server that need to send lots of data to IP addresses not on
its local subnet.  Server will be directly connected to router interface
via ethernet.
The server SHOULD set ALL packets with a dst MAC Address of the router
(its default gateway) so the packets get delivered to the remote
subnets.
The server DOES NOT do this... grr.

Is there a way to have router interface process all packets that arrive
on this interface (includes packets that don't have interface MAC
Address as dst MAC Address)?

All of these packets are destined for remote networks.  Thanks.

Cheers,
 
RR
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/