[c-nsp] Set a L3 routed interface on a 6500 + SUP2 to 'promiscuous'mode?

[David Prall]

VACL Capture on OSM/SPA/LAN interfaces or even SPAN on LAN interfaces should
work fine.

What info does the server receive when it arps for a remote address. I'll
assume that both ends have a /30 configured, and you aren't attempting to
use Proxy-arp. 

--
http://dcp.dcptech.com
  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of 
> Rafael Rodriguez
> Sent: Thursday, May 15, 2008 7:34 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Set a L3 routed interface on a 6500 + SUP2 
> to 'promiscuous'mode?
> 
> Hello all,
> 
> Here is the issue I am facing:
> 
> We have a server that need to send lots of data to IP addresses not on
> its local subnet.  Server will be directly connected to 
> router interface
> via ethernet.
> The server SHOULD set ALL packets with a dst MAC Address of the router
> (its default gateway) so the packets get delivered to the remote
> subnets.
> The server DOES NOT do this... grr.
> 
> Is there a way to have router interface process all packets 
> that arrive
> on this interface (includes packets that don't have interface MAC
> Address as dst MAC Address)?
> 
> All of these packets are destined for remote networks.  Thanks.
> 
> Cheers,
>  
> RR
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/