[c-nsp] Cisco Security Advisory: Cisco IOS Secure Shell Denial of Service
Cisco Systems Product Security Incident Response Team
psirt at cisco.com
Wed May 21 12:00:00 EDT 2008
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Cisco Security Advisory: Cisco IOS Secure Shell Denial of Service
Vulnerabilities
Advisory ID: cisco-sa-20080521-ssh
http://www.cisco.com/warp/public/707/cisco-sa-20080521-ssh.shtml
Revision 1.0
For Public Release 2008 May 21 1600 UTC (GMT)
+--------------------------------------------------------------------
Summary
=======
The Secure Shell server (SSH) implementation in Cisco IOS contains
multiple vulnerabilities that allow unauthenticated users the ability
to generate a spurious memory access error or, in certain cases,
reload the device.
The IOS SSH server is an optional service that is disabled by
default, but its use is highly recommended as a security best
practice for management of Cisco IOS devices. SSH can be configured
as part of the AutoSecure feature in the initial configuration of IOS
devices, AutoSecure run after initial configuration, or manually.
Devices that are not configured to accept SSH connections are not
affected by these vulnerabilities.
Common Vulnerabilities and Exposures (CVE) identifier CVE-2008-1159
has been assigned to this vulnerability.
This advisory is posted at
http://www.cisco.com/warp/public/707/cisco-sa-20080521-ssh.shtm
Affected Products
=================
Vulnerable Products
+------------------
Cisco devices running certain 12.4-based IOS releases and configured
to be managed via SSH may be affected by this issue.
The IOS secure shell server is disabled by default. To determine if
SSH is enabled, use the show ip ssh command.
Router#show ip ssh
SSH Enabled - version 2.0
Authentication timeout: 120 secs; Authentication retries: 3
The previous output shows that SSH is enabled on this device and that
the SSH protocol major version that is being supported is 2.0. If the
text "SSH Disabled" is displayed, the device is not vulnerable.
Possible values for the SSH protocol version reported by IOS are:
* 1.5: only SSH protocol version 1 is enabled
* 1.99: SSH protocol version 2 with SSH protocol version 1
compatibility enabled
* 2.0: only SSH protocol version 2 is enabled
For more information about SSH versions in IOS, please check the
following URL:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gt_ssh2.html
The SSH server is not available in all IOS images. Devices that do
not support SSH are not vulnerable. Please consult the table of fixed
software in the Software Version and Fixes section for the specific
12.4-based IOS releases that are affected.
To determine the software running on a Cisco product, log in to the
device and issue the show version command to display the system
banner. Cisco IOS software will identify itself as "Internetwork
Operating System Software" or simply "IOS". The image name will be
displayed between parentheses on the next line of output followed by
"Version" and the IOS release name. Other Cisco devices will not have
the show version command or will give different output.
The following example identifies a Cisco product running IOS release
12.4(17):
Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(17),
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 07-Sep-07 16:05 by prod_rel_team
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Router uptime is 1 week, 5 hours, 5 minutes
System returned to ROM by power-on
System image file is "flash:c2600-adventerprisek9-mz.124-17.bin"
Additional information about Cisco IOS release naming is available at
http://www.cisco.com/warp/public/620/1.html
Products Confirmed Not Vulnerable
+--------------------------------
Cisco devices that do not run IOS are not affected.
Cisco IOS devices that do not have the SSH server feature enabled are
not affected.
IOS-XR images are not affected.
The following IOS release trains are not affected:
* 10-based releases
* 11-based releases
* 12.0-based releases
* 12.1-based releases
* 12.2-based releases
* 12.3-based releases
IOS releases prior to 12.4(7), 12.4(13d)JA, and 12.4(9)T are not
affected by this vulnerability.
No other Cisco products are currently known to be affected by these
vulnerabilities.
Details
=======
Secure shell (SSH) was developed as a secure replacement for the
telnet, ftp, rlogin, rsh, and rcp protocols, which allow for the
remote access of devices. The main difference between SSH and older
protocols is that SSH provides strong authentication, guarantees
confidentiality, and uses encrypted transactions.
The server side of the SSH implementation in Cisco IOS contains
multiple vulnerabilities that allow an unauthenticated user to
generate a spurious memory access or, in certain cases, reload the
device. If the attacker is able to reload the device, these
vulnerabilities could be repeatedly exploited to cause an extended
Denial of Service (DoS) condition.
A device with the SSH server enabled is vulnerable.
These vulnerabilities are documented in Cisco Bug IDs:
* CSCsk42419 ( registered customers only)
* CSCsk60020 ( registered customers only)
* CSCsh51293 ( registered customers only)
Vulnerability Scoring Details
=============================
Cisco is providing scores for the vulnerabilities in this advisory
based on the Common Vulnerability Scoring System (CVSS). The CVSS
scoring in this Security Advisory is done in accordance with CVSS
version 2.0.
Cisco will provide a base and temporal score. Customers can then
compute environmental scores to assist in determining the impact of
the vulnerability in individual networks.
CVSS is a standards-based scoring method that conveys vulnerability
severity and helps determine urgency and priority of response.
Cisco has provided an FAQ to answer additional questions regarding
CVSS at
http://www.cisco.com/web/about/security/intelligence/cvss-qandas.html
Cisco has also provided a CVSS calculator to help compute the
environmental impact for individual networks at
http://intellishield.cisco.com/security/alertmanager/cvss
* CSCsk42419 - SSHv2 spurious memory access
CVSS Base Score - 7.8
Access Vector - Network
Access Complexity - Low
Authentication - None
Confidentiality Impact - None
Integrity Impact - None
Availability Impact - Complete
CVSS Temporal Score - 6.4
Exploitability - Functional
Remediation Level - Official-Fix
Report Confidence - Confirmed
* CSCsk60020 - SSHv2 spurious memory access
CVSS Base Score - 7.8
Access Vector - Network
Access Complexity - Low
Authentication - None
Confidentiality Impact - None
Integrity Impact - None
Availability Impact - Complete
CVSS Temporal Score - 6.4
Exploitability - Functional
Remediation Level - Official-Fix
Report Confidence - Confirmed
* CSCsh51293 - Spurious memory access when SSH packets received
CVSS Base Score - 7.8
Access Vector - Network
Access Complexity - Low
Authentication - None
Confidentiality Impact - None
Integrity Impact - None
Availability Impact - Complete
CVSS Temporal Score - 6.4
Exploitability - Functional
Remediation Level - Official-Fix
Report Confidence - Confirmed
Impact
======
Successful exploitation of these vulnerabilities may result in a
spurious memory access or, in certain cases, reload the device
potentially resulting in a DoS condition.
Software Versions and Fixes
===========================
When considering software upgrades, also consult
http://www.cisco.com/go/psirt and any subsequent advisories to
determine exposure and a complete upgrade solution.
In all cases, customers should exercise caution to be certain the
devices to be upgraded contain sufficient memory and that current
hardware and software configurations will continue to be supported
properly by the new release. If the information is not clear, contact
the Cisco Technical Assistance Center ("TAC") or your contracted
maintenance provider for assistance.
Each row of the Cisco IOS software table (below) describes a release
train and the platforms or products for which it is intended. If a
given release train is vulnerable, then the earliest possible
releases that contain the fix (the "First Fixed Release") and the
anticipated date of availability for each are listed in the "Rebuild"
and "Maintenance" columns. A device running a release in the given
train that is earlier than the release in a specific column (less
than the First Fixed Release) is known to be vulnerable. The release
should be upgraded at least to the indicated release or a later
version (greater than or equal to the First Fixed Release label).
For more information on the terms "Rebuild" and "Maintenance,"
consult the following URL:
http://www.cisco.com/warp/public/620/1.html
IOS releases prior to 12.4(7), 12.4(13d)JA, and 12.4(9)T are not
affected by this vulnerability.
+----------------------------------------+
| Major | Availability of Repaired |
| Release | Releases |
|------------+---------------------------|
| Affected | First Fixed | Recommended |
| 12.0-Based | Release | Release |
| Releases | | |
|----------------------------------------|
| There are no affected 12.0 based |
| releases |
|----------------------------------------|
| Affected | First Fixed | Recommended |
| 12.1-Based | Release | Release |
| Releases | | |
|----------------------------------------|
| There are no affected 12.1 based |
| releases |
|----------------------------------------|
| Affected | First Fixed | Recommended |
| 12.2-Based | Release | Release |
| Releases | | |
|----------------------------------------|
| There are no affected 12.2 based |
| releases |
|----------------------------------------|
| Affected | First Fixed | Recommended |
| 12.3-Based | Release | Release |
| Releases | | |
|----------------------------------------|
| There are no affected 12.3 based |
| releases |
|----------------------------------------|
| Affected | First Fixed | Recommended |
| 12.4-Based | Release | Release |
| Releases | | |
|------------+-------------+-------------|
| | 12.4(13f) | |
| | | |
| | 12.4(16b) | |
| 12.4 | | 12.4(18b) |
| | 12.4(17a) | |
| | | |
| | 12.4(18) | |
|------------+-------------+-------------|
| | Only 12.4 | |
| | (13d)JA and | |
| | 12.4(13d) | |
| | JA1 are | |
| 12.4JA | vulnerable, | 12.4(16b) |
| | all other | JA3 |
| | 12.4JA | |
| | releases | |
| | are not | |
| | affected. | |
|------------+-------------+-------------|
| 12.4JK | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4JMA | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4JMB | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4JMC | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4JX | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4MD | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4MR | 12.4(16)MR2 | 12.4(16)MR |
|------------+-------------+-------------|
| 12.4SW | 12.4(15)SW1 | 12.4(15)SW1 |
|------------+-------------+-------------|
| | 12.4(9)T6 | |
| | | |
| | 12.4(11)T4 | |
| 12.4T | | 12.4(15)T5 |
| | 12.4(15)T2 | |
| | | |
| | 12.4(20)T | |
|------------+-------------+-------------|
| 12.4XA | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4XB | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4XC | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4XD | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| | Vulnerable; | |
| 12.4XE | first fixed | 12.4(15)T5 |
| | in 12.4T | |
|------------+-------------+-------------|
| | Vulnerable; | |
| 12.4XF | first fixed | 12.4(15)T5 |
| | in 12.4T | |
|------------+-------------+-------------|
| 12.4XG | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| | Vulnerable; | |
| 12.4XJ | first fixed | 12.4(15)T5 |
| | in 12.4T | |
|------------+-------------+-------------|
| | Vulnerable; | |
| 12.4XK | first fixed | 12.4(15)T5 |
| | in 12.4T | |
|------------+-------------+-------------|
| 12.4XL | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4XM | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4XN | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4XQ | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4XT | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4XV | Vulnerable; | |
| | contact TAC | |
|------------+-------------+-------------|
| 12.4XW | 12.4(11)XW6 | 12.4(11)XW6 |
|------------+-------------+-------------|
| 12.4XY | Not | |
| | Vulnerable | |
|------------+-------------+-------------|
| 12.4XZ | Not | |
| | Vulnerable | |
+----------------------------------------+
Workarounds
===========
If disabling the IOS SSH Server is not feasible, the following
workarounds may be useful to some customers in their environments.
Telnet
+-----
Telnet is not vulnerable to the issue described in this advisory and
may be used as an insecure alternative to SSH. Telnet does not
encrypt the authentication information or data; therefore, it should
only be enabled for trusted local networks.
VTY Access Class
+---------------
It is possible to limit the exposure of the Cisco device by applying
a VTY access class to allow only known, trusted hosts to connect to
the device via SSH.
For more information on restricting traffic to VTYs, please consult:
http://cisco.com/en/US/products/sw/iosswrel/ps1835/products_command_reference_chapter09186a00800873c8.html#wp1017389
The following example permits access to VTYs from the 192.168.1.0/24
netblock and the single IP address 172.16.1.2 while denying access
from anywhere else:
Router(config)# access-list 1 permit 192.168.1.0 0.0.0.255
Router(config)# access-list 1 permit host 172.16.1.2
Router(config)# line vty 0 4
Router(config-line)# access-class 1 in
Different Cisco platforms support different numbers of terminal
lines. Check your device's configuration to determine the correct
number of terminal lines for your platform.
Infrastructure ACLs (iACL)
+-------------------------
Although it is often difficult to block traffic transiting your
network, it is possible to identify traffic that should never be
allowed to target your infrastructure devices and block that traffic
at the border of your network. Infrastructure ACLs are considered a
network security best practice and should be considered as a
long-term addition to good network security as well as a workaround
for this specific vulnerability. The ACL example shown below should
be included as part of the deployed infrastructure access-list, which
will protect all devices with IP addresses in the infrastructure IP
address range.
A sample access list for devices running Cisco IOS is below:
!--- Permit SSH services from trusted hosts destined
!--- to infrastructure addresses.
access-list 150 permit tcp TRUSTED_HOSTS MASK INFRASTRUCTURE_ADDRESSES MASK eq 22
!--- Deny SSH packets from all other sources destined to infrastructure addresses.
access-list 150 deny tcp any INFRASTRUCTURE_ADDRESSES MASK eq 22
!--- Permit all other traffic to transit the device.
access-list 150 permit IP any any
interface serial 2/0
ip access-group 150 in
The white paper titled "Protecting Your Core: Infrastructure
Protection Access Control Lists" presents guidelines and recommended
deployment techniques for infrastructure protection access lists.
This white paper can be obtained here:
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_white_paper09186a00801a1a55.shtml
Control Plane Policing (CoPP)
+----------------------------
The Control Plane Policing (CoPP) feature may be used to mitigate
these vulnerabilities. In the following example, only SSH traffic
from trusted hosts and with 'receive' destination IP addresses is
permitted to reach the route processor (RP).
Note: Dropping traffic from unknown or untrusted IP addresses may
affect hosts with dynamically assigned IP addresses from connecting
to the Cisco IOS device.
access-list 152 deny tcp TRUSTED_ADDRESSES MASK any eq 22
access-list 152 permit tcp any any eq 22
!
class-map match-all COPP-KNOWN-UNDESIRABLE
match access-group 152
!
!
policy-map COPP-INPUT-POLICY
class COPP-KNOWN-UNDESIRABLE
drop
!
control-plane
service-policy input COPP-INPUT-POLICY
In the above CoPP example, the ACL entries that match the exploit
packets with the "permit" action result in these packets being
discarded by the policy-map "drop" function, while packets that match
the "deny" action are not affected by the policy-map drop function.
CoPP is available in Cisco IOS release trains 12.0S, 12.2SX, 12.2S,
12.3T, 12.4, and 12.4T.
Additional information on the configuration and use of the CoPP
feature can be found at the following URL:
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6642/prod_white_paper0900aecd804fa16a.html
Obtaining Fixed Software
========================
Cisco has made free software available to address this vulnerability
for affected customers. Prior to deploying software, customers should
consult their maintenance provider or check the software for feature
set compatibility and known issues specific to their environment.
Customers may only install and expect support for the feature sets
they have purchased. By installing, downloading, accessing or
otherwise using such software upgrades, customers agree to be bound
by the terms of Cisco's software license terms found at
http://www.cisco.com/public/sw-license-agreement.html, or as
otherwise set forth at Cisco.com Downloads at
http://www.cisco.com/public/sw-center/sw-usingswc.shtml
Do not contact either "psirt at cisco.com" or "security-alert at cisco.com"
for software upgrades.
Customers with Service Contracts
+-------------------------------
Customers with contracts should obtain upgraded software through
their regular update channels. For most customers, this means that
upgrades should be obtained through the Software Center on Cisco's
worldwide website at http://www.cisco.com
Customers using Third-party Support Organizations
+------------------------------------------------
Customers whose Cisco products are provided or maintained through
prior or existing agreement with third-party support organizations
such as Cisco Partners, authorized resellers, or service providers
should contact that support organization for guidance and assistance
with the appropriate course of action in regards to this advisory.
The effectiveness of any workaround or fix is dependent on specific
customer situations such as product mix, network topology, traffic
behavior, and organizational mission. Due to the variety of affected
products and releases, customers should consult with their service
provider or support organization to ensure any applied workaround or
fix is the most appropriate for use in the intended network before it
is deployed.
Customers without Service Contracts
+----------------------------------
Customers who purchase direct from Cisco but who do not hold a Cisco
service contract and customers who purchase through third-party
vendors but are unsuccessful at obtaining fixed software through
their point of sale should get their upgrades by contacting the Cisco
Technical Assistance Center (TAC). TAC contacts are as follows.
* +1 800 553 2447 (toll free from within North America)
* +1 408 526 7209 (toll call from anywhere in the world)
* e-mail: tac at cisco.com
Have your product serial number available and give the URL of this
notice as evidence of your entitlement to a free upgrade. Free
upgrades for non-contract customers must be requested through the
TAC.
Refer to http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
for additional TAC contact information, including special localized
telephone numbers and instructions and e-mail addresses for use in
various languages.
Exploitation and Public Announcements
=====================================
The Cisco PSIRT is not aware of any public announcements or malicious
use of the vulnerability described in this advisory.
This vulnerability was discovered by Cisco internal testing and
customer service requests.
Status of This Notice: FINAL
============================
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY
KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE
INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS
AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS
DOCUMENT AT ANY TIME.
A stand-alone copy or Paraphrase of the text of this document that
omits the distribution URL in the following section is an
uncontrolled copy, and may lack important information or contain
factual errors.
Distribution
============
This advisory is posted on Cisco's worldwide website at
http://www.cisco.com/warp/public/707/cisco-sa-20080521-ssh.shtml
In addition to worldwide web posting, a text version of this notice
is clear-signed with the Cisco PSIRT PGP key and is posted to the
following e-mail and Usenet news recipients.
* cust-security-announce at cisco.com
* first-teams at first.org
* bugtraq at securityfocus.com
* vulnwatch at vulnwatch.org
* cisco at spot.colorado.edu
* cisco-nsp at puck.nether.net
* full-disclosure at lists.grok.org.uk
* comp.dcom.sys.cisco at newsgate.cisco.com
Future updates of this advisory, if any, will be placed on Cisco's
worldwide website, but may or may not be actively announced on
mailing lists or newsgroups. Users concerned about this problem are
encouraged to check the above URL for any updates.
Revision History
================
+---------------------------------------+
| Revision | | Initial |
| 1.0 | 2008-May-21 | public |
| | | release. |
+---------------------------------------+
Cisco Security Procedures
=========================
Complete information on reporting security vulnerabilities in Cisco
products, obtaining assistance with security incidents, and
registering to receive security information from Cisco, is available
on Cisco's worldwide website at
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
This includes instructions for press inquiries regarding Cisco
security notices. All Cisco security advisories are available at
http://www.cisco.com/go/psirt
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.8 (Darwin)
iEYEARECAAYFAkg0RSMACgkQ86n/Gc8U/uCX8QCaA9y2y/y0uC1DPonlJwMGR1Kd
jaMAnAz/4J+L7nxWxhppehcJsr0bGmsA
=WzxB
-----END PGP SIGNATURE-----
More information about the cisco-nsp
mailing list