[c-nsp] VLAN 1005 Translation?

[Daniel Hooper]

Can you change the type of vlan? On my 3550's 1005 is showing as trnet,
are you able to change it to enet?

Just out of interest, is their a way to achieve VLAN mapping on the 3550
platform?

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Paul Stewart
> Sent: Monday, 26 May 2008 3:18 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] VLAN 1005 Translation?
> 
> I have a GigE coming in from another provider and they are sending us
a
> trunk - one of the VLAN's is 1005 (yup, that's right). This is a 7606
> Sup720-3BXL
> 
> Not fully understanding the purpose of 1005, it doesn't work.  Trying
> to
> take a trunk in from them and then send 1005 and a few others out to
> another
> box.  The other VLAN's work fine.
> 
> So, I thought I might be able to do VLAN translation - is that
possible
> on
> 1005?  I just want to take 1005 and translate it to 900:
> 
> interface GigabitEthernet4/7
>  switchport
>  switchport trunk encapsulation dot1q
>  switchport trunk allowed vlan
> 18,84,108,127,131,139,151,163,164,172,175,176
>  switchport trunk allowed vlan add
> 180,193,195,196,198,200,243,245,326,341,364
>  switchport trunk allowed vlan add 381,382,389,391,402,696,1005
>  switchport mode trunk
>  switchport vlan mapping enable
>  switchport vlan mapping 1005 900
> 
> 
> Is there anything I can do to make this work or is my config wrong?
> Also,
> do I have to translate *back* somewhere such as the "outgoing" port?
> 
> Thanks very much,
> 
> Paul
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/