[c-nsp] Access via session <mod> command

[up at 3.am]

On Fri, 30 May 2008, Everton Diniz wrote:

> Hi all,
>
> I´m trying access to a msfc card through session <mod> command, but
> the access is not authenticated. The access via network its ok.
>
> What´s missing in config of MSFC?
>
> aaa new-model
> aaa authentication login default group radius local
> aaa authentication enable default group radius enable
> aaa authorization exec default group radius none

Have you tried replacing the above with:

aaa authorization exec default group radius local

?

> aaa authorization network default group radius none
> aaa accounting exec default start-stop group radius
>
> line vty 0 4
> exec-timeout 30 0
> password 7 xxx
> transport input telnet ssh
>
> Tks all,
> Everton
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

James Smallacombe		      PlantageNet, Inc. CEO and Janitor
up at 3.am							    http://3.am
=========================================================================