[c-nsp] ME Switch Managment over Trunk Interfaces?

[lee.e.rian at census.gov]

Have you tried it without the "switchport trunk native vlan 106"?
If the other side is tagging everything..

Lee

-----cisco-nsp-bounces at puck.nether.net wrote: -----

>To: <cisco-nsp at puck.nether.net>
>From: "cp" <lists at pleasants.net>
>Sent by: cisco-nsp-bounces at puck.nether.net
>Date: 10/31/2008 01:06PM
>Subject: [c-nsp] ME Switch Managment over Trunk Interfaces?
>
>I'm new to Cisco ME switches, so please bare with my basic question.
>I
>am having a difficult time trying to manage the device over trunk
>interface. It doesn't work.  My management IP lives on a vlan
>interface.
>Below is my configuration.  I tried vlan1 without luck too. Do I
>really
>have to burn a port for management? I'm probably missing something
>simple. Any assistance is appreciated.
>
>
>
>Thanks,
>
>Chip
>
>
>
>
>
>
>
>vlan 100-106
>
>
>
>interface GigabitEthernet0/1
>
>port-type nni
>
>switchport trunk native vlan 106
>
>switchport trunk allowed vlan 100-106
>
>switchport mode trunk
>
>
>
>interface Vlan106
>
>ip address 10.24.100.2 255.255.255.252
>
>
>
>
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/