[c-nsp] SXF15/SXF15a experiences?

[Karl Gaissmaier]

Hi,

Janet Sullivan schrieb:
..
> Of course, opinions on SXH3a are also welcome, but I'm a bit untrusting
> of the SXH beast still. <grin>

my tests with SXH on a sup720-3B showed a constant higher load
of the switch processor compared to any SXF version:

Version SXF:
> cat65# remote command switch show proc cpu sort
> 
> CPU utilization for five seconds: 14%/1%; one minute: 11%; five minutes: 11%
>  PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process 
>   41    18207424  33591134        542  5.51%  6.73%  6.77%   0 slcp process     
>  133      321528     49015       6559  4.47%  0.37%  0.16%   0 L2 MAC oob sync  
>  101     4551988    195787      23249  1.67%  1.70%  1.68%   0 Vlan Statistics 

Version SXH:
The slcp process is consuming always at least 20% on SXH releases on the
same box.

Remarks: The box is used as a LAN collapsed backbone router, terminating
~ 170 SVIs with about 8k MAC addresses in the LAN.

Best Regards
	Charly