[c-nsp] ips usbflash

[Christian Koch]

do you have the signature location configured properly?

ie: ip ips config location flash:(directory)

On Sat, Nov 8, 2008 at 7:48 PM, Dan Letkeman <danletkeman at gmail.com> wrote:
> Hello,
>
> I have configured IPS on a 2821 running the firewall ios.  I have the
> configuration and signature files on a usbflash card.  It all works
> fine until the router reloads, then the usbflash does not mount.  Is
> there a command load it?
>
> If I do a "show usb device 1" it show the device, and all the details,
> but I cannot do a dir on the device, and I cannot write to it.
>
> Dan.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>