[c-nsp] L2VPN Interworking

[Hitesh Vinzoda]

Check for MTU size on interfaces.

Regards

Hitesh Vinzoda


On 11/10/08, Mohammad Khalil <eng_mssk at hotmail.com> wrote:
>
>
> Dears
> i have the following setup:
> CE1 --> PE1 --> MPLS Cloud --> PE2 --> CE2
> PE1 is 7609 and has the IOS image
> c7600rsp72043-advipservices-mz.122-33.SRD.bin
> PE2 is a VXR G2 and has the IOS image
> c7200p-spservicesk9-mz.122-33.SRC1.bin
> CE1 --> PE1 is ATM connection
> CE2 --> PE2 Vlan connection (Sub interface)
>
> i have established xconnect between the 2 sides
> the xconnect is up and there is a ping between the 2 sides
> but the problem is in the size
> when i issue the command ping x.x.x.x repeat 1000 size 1500
> i face remarkable packet drop !!
> any ideas ??
> knowing that there is no congestion at all in my links nor through the MPLS
> cloud
>
> _________________________________________________________________
> News, entertainment and everything you care about at Live.com. Get it now!
> http://www.live.com/getstarted.aspx
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>