[c-nsp] HWIC-4ESW

[Brett Looney]

> I've got a 2801 whose built-in ports are damaged.

Maintenance contract? Probably cheaper than the HWIC-4ESW.

> I was wondering if I could add an HWIC-4ESW module
> and use this to connect to both the provider and
> LAN.

Yes.

> And will I be able to do NAT with this setup?

Yes.

> Will I also be able to do PPPOE on the vlan interface?

I'm 90% sure you can do this but you will not be able to set the MAC address
on the VLAN interface. And any QoS policies you have will also probably not
work.

B.