[c-nsp] SXI testing
Marian Ďurkovič
md at bts.sk
Fri Nov 21 07:25:06 EST 2008
On Thu, Nov 20, 2008 at 04:53:25PM +0000, Phil Mayers wrote:
> All,
>
> In case people are interested, I have tested a load of stuff as working
> on 12.2(33)SXI.
>
> http://cisco.cluepon.net/index.php/Ios_sxi
Just tested DOM support on SXI. Here are the findings:
1) much more accurate static thresholds table for DOM-supported
transceivers than in SXH4
- e.g. for XENPAK-ZR, SXH4 has strange temperature, TX Power & RX power
static thresholds - which are now correct in SXI
2) laser current thresholds still "N/A" and the transceivers showing low
alarm (--)
High Alarm High Warn Low Warn Low Alarm
Current Threshold Threshold Threshold Threshold
Port (milliamperes) (mA) (mA) (mA) (mA)
---------- ----------------- ---------- --------- --------- ---------
Te1/1 102.1 -- N/A N/A N/A N/A
This is working fine in SXF which reads manufacturer's thresholds from
the transceiver:
High Alarm High Warn Low Warn Low Alarm
Current Threshold Threshold Threshold Threshold
Port (milliamperes) (mA) (mA) (mA) (mA)
------- ----------------- ---------- --------- --------- ---------
Te1/4 101.5 152.4 142.3 61.0 50.8
3) for SFPs with external calibration IOS has reversed or broken threshold
violation comparisions. This is also working fine in SXF.
#sh inte transceiver threshold violations
Gi5/1 0000:00:32:15 0000:00:02:03 Tx power high alarm
-6.0 dBm > -1.0 dBm
0000:00:02:03 Tx bias high alarm
4.0 mA > 14.9 mA
With kind regards,
M.
--------------------------------------------------------------------------
---- ----
---- Marian Ďurkovič network manager ----
---- ----
---- Slovak Technical University Tel: +421 2 571 041 81 ----
---- Computer Centre, Nám. Slobody 17 Fax: +421 2 524 94 351 ----
---- 812 43 Bratislava, Slovak Republic E-mail/sip: md at bts.sk ----
---- ----
--------------------------------------------------------------------------
More information about the cisco-nsp
mailing list