[c-nsp] Cisco 3620 with WIC-1ADSL cards

[Nick Voth]

>> I am trying to get a 3620 configured with 4 of the WIC-1ADSL cards. I have
>> gone through the "Software Adviser" on the Cisco site to see if it might
>> give me any clues as to what carrier card, (NM-1E2W, NM-1FE2W, etc), would
>> work. None of them seem to allow me to choose the ADSL WIC cards once I add
>> them to the base 3620 configuration.
>> 
>> I had heard that the NM-1FE2W and the NM-2W would work, but there too, I
>> don't get the options to choose the ADSL WIC cards in the Software Adviser.
> 
> NM-1FE2W or NM-2W should work according to
> http://www.cisco.com/en/US/prod/collateral/routers/ps221/product_data_sheet090
> 0aecd8028aa5a_ps3129_Products_Data_Sheet.html
> 
>   "All the WICs are supported both in onboard WIC/HWIC slots and in the
>    WIC carrier cards (NM-2W, NM-xFE2W, NM-xFE2W-V2, and NM-1FE1R2W)
>    slots."
> 
> You may have problems finding the cards in the "Software Adviser"
> because they are End-of-Sale, ref
> http://www.cisco.com/en/US/prod/collateral/modules/ps3129/prod_end-of-life_not
> ice0900aecd80710ce9.html
> 
> 
> 
> Bjørn

Thanks Bjorn. I didn't even think about the End-of-Sale aspects. That would
make sense. I was looking at the same page you referenced me to for the ADSL
WIC and saw it was supported on the 3620 platform. Thus, my confusion with
the "Software Adviser" tool.

Thanks again for your help.

-Nick Voth