[c-nsp] Static default route VRF not appearing

[Mark Tech]

Hi
In an IP-VPN test, I need to add a static default route pointing to CE1 from PE1. This would I assume be redistributed to other PE's, then CE routers as 'redistribute static' is enabled on the PE config for this customer however this seems not to be the case.

In fact PE2 never even sees that particular static route, even though it can see other redistributed static routes that I put in just to check. Is there some extra config needed on PE1 in order for the 0/0 static route to be advertised to other PE's and therefore CE's such as default-originate as per standard BGP?

Regards

Mark