[c-nsp] Cisco BGP Running on VRF?

[Gert Doering]

Hi,

On Tue, Sep 30, 2008 at 05:50:17PM -0500, Murphy, William  wrote:
> I have a Cat6506 VSS720-3C-XL switch on which I have configured BGP on a
> VRF using  "address-family ipv4 unicast vrf internet".  I am getting BGP
> routes and all appears well but I can only display BGP info by using
> "show ip bgp vpnv4 ..." commands.  I didn't intend to run VPNV4 and it

Well, if you don't want VPNV4, then don't configure a VPNV4 address
family - which you did by configuring "vrf internet".

Non-VPNV4-BGP is configured in "address-family ipv4 unicast", without
any "vrf" things tacked to it.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 304 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20081001/8f6de2fa/attachment.bin>