[c-nsp] Forcing VLAN interface to UP state

[Bagosi Rómeó]

Thank you for all! The no autostate command on the vlan interface helped our problem.

Best Regards,
Romeo B.

-----Original Message-----
From: Tim Franklin [mailto:tim at pelican.org] 
Sent: Wednesday, October 01, 2008 3:54 PM
To: Bagosi Rómeó
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Forcing VLAN interface to UP state

On Wed, October 1, 2008 2:02 pm, Bagosi Rómeó wrote:

> Is there a way to force a VLAN interface (ex.: interface vlan 400) to
> UP/UP state on a Cisco UC520 (router, switch...), WITHOUT connecting a
> device to a port which is in the mentioned VLAN?

'no autostate' on the vlan interface works for 87x.  No idea if that's
valid or not for the UC520, sorry.

Regards,
Tim.