[c-nsp] Failed to locate egress interface for UDP

[trejrco at gmail.com]

FWIW - FF02::1:2 to UDP/547 is a DHCPv6 solicit (or information request) ... And the ASA probably doesn't have relaying configured (or, atleast, doesn't know where the server is)

HTH
/TJ
------Original Message------
From: Jay Hennigan
Sender: cisco-nsp-bounces at puck.nether.net
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Failed to locate egress interface for UDP
Sent: Oct 3, 2008 01:28

Bagosi Rómeó wrote:
> Hi, 
> 
> Anybody ever seen this message:
> %ASA-6-110002: Failed to locate egress interface for UDP from inside:fe80::21f:29ff:fe1c:fa11/546 to ff02::1:2/547
> This message is logged every 2 minutes...

You have a Hewlett-Packard device with a MAC address 001f:291c:fa11 that 
has IPv6 enabled.  It is trying to autodiscover its network settings.

The ASA is probably not properly set up to handle IPv6.

--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


Sent from my Verizon Wireless BlackBerry