[c-nsp] ip flow egress on c76k

[Zorg 421]

Do you mean, an mls command for egress netflow?It seems SRB and later
changed a bit the behaviour, ip flow ingress and egress should also
configure the MSFC

http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/nde.html#wp1131066

(if my understanding is correct).

Regards.

On Tue, Oct 14, 2008 at 5:06 PM, Christian MacNevin <
christian.macnevin at gmail.com> wrote:

> ip flow commands are only relative to the MSFC, unless I'm mistaken. So is
> there an mls command for this?
>
>
>
> On Oct 14, 2008, at 7:31 AM, Zorg 421 wrote:
>
> Hello,
> Is anyone able to make "ip flow egress" works on cisco 7604?
>
> 12.2.33 SRB4 and SRC2, not working, only some flows processor switched
> comes
> out.
>
> global config:
>
> mls aging fast time 4 threshold 2
> mls aging long 900
> mls aging normal 32
> mls flow ip interface-full
> no mls flow ipv6
> mls nde sender version 5
>
> interface:
>
> ip flow ingress
> ip flow egress
>
>
> (I cannot do ingress on another interface: it has HSRP and traffic coming
> in
> going out which would be duplicated)
>
> Regards.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>