[c-nsp] Strange bug doing telnet to a switch

[Darryl Dunkin]

It is likely someone pasted a configuration improperly.

You probably have a banner section in the config like this:
banner motd ^C
peed 100
 duplex full
 no cdp e
^C

Run a 'no banner motd' in config mode to clear the banner.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of luismi
Sent: Tuesday, October 14, 2008 15:38
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Strange bug doing telnet to a switch

Every time I do telnet I obtain the same result.

Is there anyone here with some similar experience?

$ telnet sw1
Trying 10.10.10.156...
Connected to sw1.hispasat.local.
Escape character is '^]'.
peed 100
 duplex full
 no cdp e
User Access Verification

Username:

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/