[c-nsp] Debugging IPSEC VPN from Clients

[David Prall]

Show aaa user is where I would start, couldn't play with it to see if it is
right or not.

--
http://dcp.dcptech.com
 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Marc Haber
> Sent: Friday, October 17, 2008 3:48 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Debugging IPSEC VPN from Clients
> 
> Hi,
> 
> I have a bunch of users using the Cisco VPN Client to connect to an
> 1841 router (running IOS 12.4(9)T4).
> 
> Is there any show command to show the actual user names that are
> connected right now? I didn't find any appropriate show crypto foo
> command.
> 
> Additionally, can I configure the 1841 to log session establishment
> and termination to syslog, preferably including the IP address of the
> peer?
> 
> Any hints will be appreciated.
> 
> Greetings
> Marc
> 
> --
> -----------------------------------------------------------------------
> ------
> Marc Haber         | "I don't trust Computers. They | Mailadresse im
> Header
> Mannheim, Germany  |  lose things."    Winona Ryder | Fon: *49 621
> 72739834
> Nordisch by Nature |  How to make an American Quilt | Fax: *49 3221
> 2323190
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/